JAGUAR LAND ROVER CLASSIC INFOTAINMENT SYSTEM Updates for Navigation software
Step by step instructions:
Attention!
Do not remove the USB stick while the machine is running. Never turn off the Classic Infotainment System or interrupt the power supply during the update. Note that the Classic Infotainment System can be switched off automatically after 30 minutes following the vehicle ignition being turned off. Therefore, updates lasting longer than 30 minutes must be carried out while the vehicle ignition is on.
Important note!
If you receive the message ‘access is denied’ or similar error message while the USB stick is being prepared, the following reason may occur: It is possible that your USB stick has been formatted in a format other than the FAT system . Please re-format your USB stick on this PC.
Important note!
With the purchase of the Classic Infotainment System you received one free of charge update of map data. You will be eligible for the first free of charge map data update for 30 days which starts from when the „PC-Tool“ has been used for the first time or your vehicle done more than 20 km from installing the unit. Please Note! You must perform the map update within 30 days from using the „PC-Tool“ for the first time or completing 20 km from your starting point, otherwise additional charges might occur.
Requirements for the use of navigation updates
a. You have the vehicle type/Classic Infotainment System
b. You have the software „Sync-Tool“
c. You have the software „PC-Tool“
d. You have a PC with the following equipment:
• Microsoft Windows® operating system (Windows XP Service Pack 2, Windows Vista 32-bit versions or Windows 7/8/10)
• Internet access without firewall restrictions and block downloads
• USB port
• A software for extracting compressed files (RAR files)
e. You will need an empty USB stick with at least 8 GB of storage space
I. Download PC Tool and Sync Tool
Download the Sync Tool and copy it to your USB stick
a. Download the „Sync-Tool“ (Click the right mouse button, choose “Save Target As”)
b. Unpack the downloaded package to your PC
c. Connect an empty USB stick to your PC and copy the folder “synctool” to the USB stick
d. After copy the USB memory stick from your PC Download the PC Tool and install it to your PC Download the “PC-Tool”
Download the PC Tool and install it to your PC
Download the „PC-Tool“ (Click on the right mouse button, select “Save target as”) and install the software on your PC.
Note:
You may experience some short delays with the Connection of the devices due to weak internet connection / insufficient network speed.
II. Prepare the USB stick on the Classic Infotainment System for the update
a. Connect the prepared USB stick to the Classic Infotainment System and select the source USB flash drive
b. The Sync Tool now starts automatically. Please follow the instructions on the screen
c. A status screen will show you the progress of the process
d. Wait until the device tells you to remove the USB memory stick (now this is prepared to save the update from your PC)
e. Turn the power off
III. Download a map update with the PC Tool
a. Connect the USB stick prepared on the Classic Infotainment System to the PC
b. Start the PC Tool and log in with your access data or create a new account
c. We recommend that you back up your data from the USB stick using the PC Tool
d. Use the PC Tool to download updates or buy additional extras
Note:
You may experience some short delays with the Connection of the devices due to weak internet connection / insufficient network speed.
e. Disconnect the USB stick from the PC (the update is now ready to install in the Classic Infotainment System)
IV. Carry out the update on the Classic Infotainment System
a. Connect the USB stick and the downloaded update with the Classic Infotainment System and select the source USB stick. The sync tool now starts automatically
b. A status screen will show you the progress of the update. The update can take from a few seconds to an hour depending on the amount of data to be updated
c. Wait until the Classic Infotainment System prompts you to remove the USB memory stick
d. You can now use the updated navigation, additional maps, and other navigation content
e. Turn the power off
The following map data is included:
Albania, Andorra, Belgium, Bosnia and Herzegovina, Belarus, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gibraltar, Greece, Hungary, Ireland, Iceland, Italy, Kosovo, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Macedonia, Moldova, Monaco, Montenegro, Netherlands, Norway, Austria, Poland, Portugal, Romania, Russia, San Marino, Sweden, Switzerland, Slovakia, Slovenia, Spain, Turkey, Ukraine, United Kingdom, Vatican City
The following map data and other contents are optional*:
Argentina, Australia, Bahrain, Brazil, Brunei, Chile, Canada, Colombia, Egypt, Indonesia, Kuwait, Malaysia, Morocco, Mexico, New Zealand, Nigeria, Oman, Qatar, Saudi Arabia, Singapore, South Africa, Thailand, Uruguay, United Arab Emirates, Vietnam * The optional map material is available for purchase by starting the PC tool (as described above)
For more Information about the Jaguar Land Rover Classic Parts please visit:
jaguarclassicparts.com or contact our Technical Advisors on +44 (0) 2476 565 708 or email
- For Jaguar Classic jclassic@jaguarlandrover.com
- For Land Rover Classic lclassic@jaguarlandrover.com